Air shower room use process: Entering the clean area: When the person entering the clean area opens the outer door, the inner door electric lock is automatically locked to prevent the unpurified air in the air shower room from flowing into the clean area, the air shower room lighting is on, and the working indicator light outside the door is on. After entering the air shower room and closing the outer door, the voice prompt: “Hello, please stand in the sensing area”. The system infrared probe starts to detect whether there is anyone. If someone is detected, the system will enter the air shower process.
During the air shower process, when someone presses the up, down, and lighting switches, the voice prompt will be: “Working, please do not touch the switch casually”. During the air shower process, when someone presses the emergency stop switch, the air shower will end. Press the emergency stop button again to cancel the emergency stop state. After the air shower is over, the inner door is unlocked, and the voice prompt is: “The shower is finished, please exit from the back door”. After the person walks out of the air shower room and closes the inner door, the system returns to the initial state and waits for the next use. If the air shower is completed and the inner door is unlocked. If the person inside does not leave the air shower room within the specified time, the system assumes that the person may have left and automatically returns to the standby state.
The air shower room consists of a large box (the fan and filter are installed in this box), a small box (the nozzle lamp is installed on this side of the double-blowing air shower room), an inner bottom plate (stainless steel sand plate), a double door of the air shower room and other accessories: filters, fans, intelligent circuit boards, spray purification equipment, which uses high-speed airflow to blow off and remove particles attached to the surface of human clothing or materials. Eliminate the strict dust-free purification standards of the construction site and produce high-quality products.
The main material of the air shower room can be selected according to the different air shower room prices: cold-rolled steel plate multi-layer pickling electrostatic SUS316, etc., the thickness is generally 0.8~1.5mm. ) The price cost of air shower rooms with different materials is different.
Principle of internal circulation in air shower: The air in the air shower area is sucked into the high-pressure fan through the primary filter and then compressed into the static pressure rate 99.99% (0.3um) by the rotatable nozzle from all directions to the person, so as to effectively and quickly remove dust particles and recirculate them into the air shower area. In this way, the internal circulation does not require any external air duct.
The inner and outer doors are locked before the air shower, and the fan starts to start the air shower. At the same time, the air shower starts timing. Voice prompt: “Working, please turn your body 360 degrees”. If the system does not detect someone in the air shower room within the specified time after the outer door is closed, the inner and outer doors of the system will automatically unlock and return to the standby state. The infrared will continue to detect. If someone is detected, the inner and outer doors will be locked and the air shower room will start air showering.
Check What are the advantages of stainless steel single air shower room
